nanoPad settings

To set-up a Korg nanoPad2, you will need 3 files:

• nanoPad scene set data, downloaded here. 
• nanoPad global data, downloaded here. 
• nanoPad scene data, downloaded here. 

To load these to a nanoPad you will need the Korg Kontrol software, which can be downloaded from here. 

To set up the nanoPad, first connect it to your computer and start the Korg Kontrol software. The Korg Kontrol software should recognise your nanoPad and connect to it.

You need to load each of the 3 files downloaded above, and then write each to the nanoPad.

• To load the scene set data, select file -> open..., open the scene set file, then select Communication -> Write Scene set.
• To load the scene data, select file -> Load Scene Data File, open the scene data file, then select Communication -> Write Scene Data.
• To load the global data, go to global mode (button), then select Open, open the global data file and select Write to write to the device.

Once you have loaded all 3 files and written them to your nanoPad, the nanoPad should behave as described.